Is it possible to create an iStack between a 6730 switch and a 6720?

ernesto_cupet6 · Created Oct 19, 2019 02:35:27

Hello @lucascella

No, it is not posible. When setting up a stack containing a mix of different switch models, follow the following rules:

- A stack cannot be set up among different switch series. For example, a stack cannot be set up among the S5700 and S6700 switches.
- A stack cannot be set up among different switch models of the same switch series. For example, a stack cannot be set up among the S5720EI and S5720HI switches.
- A stack can be set up among only certain different switch models of the same switch series.

For more details you can follow the link below:

https://support.huawei.com/enterprise/my/doc/EDOC1000069665?section=j008

Also you can use this tool for query about stack deployment:

http://support.huawei.com/online ... ang=en&domain=0

jason_hu · Created Oct 19, 2019 02:45:52

Hello@lucascella
Devices of different models cannot be stacked. If you want to stack, use the same model and type of devices for stacking.For example: S6720HI-S6720HI

ernesto_cupet6 · Created Oct 19, 2019 02:35:27

Hello @lucascella

No, it is not posible. When setting up a stack containing a mix of different switch models, follow the following rules:

- A stack cannot be set up among different switch series. For example, a stack cannot be set up among the S5700 and S6700 switches.
- A stack cannot be set up among different switch models of the same switch series. For example, a stack cannot be set up among the S5720EI and S5720HI switches.
- A stack can be set up among only certain different switch models of the same switch series.

For more details you can follow the link below:

https://support.huawei.com/enterprise/my/doc/EDOC1000069665?section=j008

Also you can use this tool for query about stack deployment:

http://support.huawei.com/online ... ang=en&domain=0

jason_hu · Created Oct 19, 2019 02:45:52

Hello@lucascella
Devices of different models cannot be stacked. If you want to stack, use the same model and type of devices for stacking.For example: S6720HI-S6720HI

LuizPuppin · Created Oct 21, 2019 14:02:46

You have two problems to stack 6720 and 6730. First is that different families cannot be stackable.
The second is that S6720-HI is using R012 VRP and S6730 is using R019 VRP.
To Stack, all equipments must using the same VRP version.

Is it possible to create an iStack between a 6730 switch and a 6720?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Is it possible to create an iStack between a 6730 switch and a 6720?

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers