Got it

IPv4 reservation in bas pool by mac (temporary)

Created: Sep 11, 2020 14:32:05Latest reply: Aug 24, 2021 19:19:41 878 10 1 0 0
  HiCoins as reward: 0 (problem unresolved)

Hello people,

I am talking to some ISPs and there is a demand to reserve IPs from the PPPoE Pool in the Net Engine (NE) concentrators.

There is a command to reserve IPv4 (https://support.huawei.com/hedex/hdx.do?docid=EDOC1100108945&id=EN-US_CLIREF_0172384985&lang=en), however, it only works with IPoE:


<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas local
[*HUAWEI-ip-pool-huawei] reserved ip-address mac


There is the same command to reserve the prefix in IPv6 (https://support.huawei.com/hedex/hdx.do?docid=EDOC1100108945&id=EN-US_CLIREF_0172385114&lang=en), this command works fine with PPPoE:


<HUAWEI> system-view
[~HUAWEI] ipv6 prefix fix-prefix1 delegation
[*HUAWEI-ipv6-prefix-fix-prefix1] prefix XXXX:XXXX:3000::1/64
[*HUAWEI-ipv6-prefix-fix-prefix1] reserved prefix mac


As there is a lot of use of CGNAT, the functionality of reserving these addresses (IPv4) by mac is interesting, at least for a while, maybe 1 day (example).

Does anyone else have this demand? More specifically on models NE40E-M2K-B and NE8000 M8? If so, please comment so that we can evaluate the possibility of requesting this function.

Featured Answers

Recommended answer

DDSN
Admin Created Sep 16, 2020 01:14:04

Hi vagkaefer,
After consulting experts, no command can be used to reserve IP addresses for PPPoE users.
View more
  • x
  • convention:

All Answers
Hi user,

Thanks for your question in the Support Community.

One of our experts will answer you soon.

Regards,

HAzcanio
View more
  • x
  • convention:

Hi, we are working on it, please wait for a moment.
View more
  • x
  • convention:

yes, we tried to do the same for some time, but without a solution so far.
View more
  • x
  • convention:

Posted by little_fish at 2020-09-11 14:35 Hi, we are working on it, please wait for a moment.
Great news, can you share some info with us?
View more
  • x
  • convention:


Yes, we also need this feature.
View more
  • x
  • convention:

DDSN
DDSN Admin Created Sep 12, 2020 02:52:56

Hi vagkaefer,
How do you confirm that reserved ip-address works only with IPoE?
View more
  • x
  • convention:

Posted by DDSN at 2020-09-12 02:52 Hi vagkaefer,How do you confirm that reserved ip-address works only with IPoE?

In the hedex we have a comment about that: https://support.huawei.com/hedex/hdx.do?docid=EDOC1100108945&id=EN-US_CLIREF_0172384985&lang=en


hedex

Even with the comment I tried to use the configuration, thinking it could be an error in the documentation.


I did the procedure, set up the pool, cut over a client, when reconnecting it already goes up with another ip, instantly.


[bras-huawei]display access-user username exemple_username
  ------------------------------------------------------------------------------
  UserID     Username                Interface      IP address       MAC
             Vlan          IPv6 address             Access type
  ------------------------------------------------------------------------------
  2552       exemple_username    Eth-Trunk2.1  XXX.XXX.209.170  006d-6198-XXXX
             3554/-        2804:XXXX:XXXX:XXXX::/64   PPPoE                          
  ------------------------------------------------------------------------------
[bras-huawei]aaa
[bras-huawei-aaa]cut access-user username  exemple_username all
[bras-huawei-aaa]display access-user username exemple_username 
------------------------------------------------------------------------------
  UserID     Username                Interface      IP address       MAC
             Vlan          IPv6 address             Access type
  ------------------------------------------------------------------------------
  8837       exemple_username    Eth-Trunk2.1  XXX.XXX.234.154  006d-6198-XXXX
             3554/-        XXX:XXXX:B0:0:26D:XXXX:FE98:4E77  PPPoE                          
  ------------------------------------------------------------------------------


If I set the IPv6 prefix, it reconnects using the same prefix. But we need this in IPv4.
View more
  • x
  • convention:

DDSN
DDSN Admin Created Sep 16, 2020 01:14:04

Hi vagkaefer,
After consulting experts, no command can be used to reserve IP addresses for PPPoE users.
View more
  • x
  • convention:

Good anwser
View more
  • x
  • convention:

12
Back to list

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.