ip policy-based-route on a 9300 series

Latest reply: Nov 13, 2014 18:25:42 1384 2 0 0
Hello everyone I need to implement ip policy-based-route on a 9300 series switch.

I've tried on several occasions and does not work.

entire network is reached through Lab3, however Lab4 requires reaching network through Lab1

I leave here with the attached network diagram

thank's in advance

This article contains more resources

You need to log in to download or view. No account?Register

  • x
  • convention:

Created Nov 13, 2014 05:55:27 Helpful(0) Helpful(0)

can you leave your configuration?
  • x
  • convention:

Created Nov 13, 2014 18:25:42 Helpful(0) Helpful(0)

on lab2

acl number 3200
rule 5 permit ip source destination

traffic classifier test operator or precedence 5
 if-match acl 3200

traffic behavior test
 redirect ip-nexthop (int lab1)
 statistic enable  

traffic policy test                     
 classifier test behavior test

interface GigabitEthernet1/1/1.1
 dot1q termination vid 74
 ip address
 traffic-policy test inbound

thak;s for reply

  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits