Got it

IP address configuration on S series switch

Latest reply: Jan 11, 2020 20:49:50 2192 3 0 0
IP address configuration on S series switch
  • x
  • convention:

user_2790689
Created Apr 13, 2017 03:41:02 Helpful(0) Helpful(0)

what's your problem?
View more
  • x
  • convention:

ms.america
Created Apr 13, 2017 08:25:36 Helpful(0) Helpful(0)

"An S series switch, except S1700, supports primary and sub IP addresses on interfaces. Each Layer 3 interface can have multiple IP addresses, including one primary IP addresses and multiple sub IP addresses. (Note: Sub IP addresses become invalid when the primary address is deleted.)Each interface on the modular switch supports 255 sub IP addresses, and each interface on the fixed switch supports 8 sub IP addresses.
For example, configure a primary IP address 10.1.0.1 and a sub IP address 10.2.0.1 for VLANIF10, with subnet mask 255.255.255.0.
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] ip address 10.1.0.1 255.255.255.0
[HUAWEI-Vlanif10] ip address 10.2.0.1 255.255.255.0 sub
(Note: After IP addresses are configured for a VLANIF interface, the clients connected to the switch use one of the IP addresses as gateway address. After sub IP addresses are configured, users can change them as required, but the new IP addresses must be on the same subnet as the primary or one sub IP address; otherwise, the subnets cannot communicate with each other.)For most models in V200R005C00 and later versions, run the undo portswitch command to switch a Layer 2 interface to a Layer 3 interface, and then configure an IP address for the interface.
For example, configure a primary IP address 10.1.0.1 and a sub IP address 10.2.0.1 for GE1/0/1, with subnet mask 255.255.255.0.
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] undo portswitch
[HUAWEI-GigabitEthernet1/0/1] ip address 10.1.0.1 255.255.255.0
[HUAWEI-GigabitEthernet1/0/1] ip address 10.2.0.1 255.255.255.0 sub"
View more
  • x
  • convention:

sadamkhaan9
Created Jan 11, 2020 20:49:50 Helpful(0) Helpful(0)

To change your IP address means to hide your public IP address by utilizing a privacy application or VPN, such as TunnelBear. A VPN will offer you with a safe and private connection to the internet. The IP Address given to you holds data about your location and a VPN will let you to stay in your present physical location but browse the internet as in case you're in a dissimilar one. Browse through https://whatismyip.network/switch-ip-address-new-location/ to find much more . Another method is to reset you modem. Just unplug your modem and wait for at least 30 seconds before you attach it back in to make sure that it will fully reset. Your modem will register with a dissimilar IP address once you plug it back in and it boots back up, some changes may be needed to clear the settings on your PC as well.

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.