Inverter status numbers in the inverter performance data chart

This section describes how to export the performance data for your plant or inverter from FusionSolar.



1.  Log in with the installer account and select the plant.

2. From the plant main page select Device Management
3. Select the device

From Device type you can leave default all (all the devices installed) or you can choose a specific device installed.

Select the inverter and from the Export menu choose Performance Data.

Select the battery and power sensor if you want to export the performance data for them also.

4. Select the parameters exported

From the page displayed, select the period and the parameters that you want to export for each device selected and OK:

5. Open the performance data file from download



After you confirm via OK, the performance data file will be automatically saved on your computer:

https://forum.huawei.com/enterprise/en/export-performance-data-for-inverter-from-fusionsolar/thread/528225-100027

Hello, noogi.
It's nice to meet you in the community.
We're working on your problem. Please be patient.

Thanks Unicef, but Your answer does not reply my question.
As You should noticed I already generate and download Performance report.

Just wanna know what are the description to numbers in column "Inverter status" in downloaded xlsx.
For instance - what means number 40960 - is it "inverter in standby"?

Regards

Hello,
Unfortunately this is all the data that you can obtain through an opemAPI account. If you want more details data about the inverters and the plant you can access Neteco with an installer account and you can export the performance data from there. Only from Neteco you can obtain all the requested data.
Thanks

Thanks

Hello, noogi.
The information you provided is incomplete. I think the number in the table may be the port number. You can view information such as the power generation amount and voltage of the power station in the performance data. The status of the inverter cannot be queried in the performance data, so naturally, there is no inverter status number.
Thanks!

I'm 100% sure this is Inverter status as description says in xlsx "B" column.
Status is changing when inverter starts in sunrise and go sleeps at sunset - watch the collection time.

Hello, noogi.
After confirmation:
40960＝ Standby: no
irradiation

768= Shutdown:
fault

2= Standby:
detecting irradiation

512=On-grid

Thank You!

513? (i think - on grid - power limited)