Hello, everyone!
PON version information confirmation
PON line statistics
MA5680T(config)#interface gpon 0/15
MA5680T(config-if-gpon-0/15)#display statistics ont-line-quality <ponid> <ontid> （Execute one every few seconds, three times in succession)
NOTE: If the optical path error increases significantly, it indicates that the optical path quality is not good, and the optical path is prioritized.
ONT, PON port statistics
MA5680T(config-if-gpon-0/15)#display statistics ont portid ontid（Execute one every few seconds, three times in succession)
NOTE: If there is a packet loss on the board, please contact the service to further locate the packet.
MA5680T(config-if-gpon-0/15)#display statistics ont-eth portid ontidont-port ontethportid（Execute one every few seconds, three times in succession)
NOTE: If there is a packet loss indicating that there is a packet loss on the ONU ETH port, you need to check the ONU.
From group: Transport&Access Network
Thanks.
