Handling Process
1. The interface don’t know the pvc 8/35, it’s means that is single PVC,we can change it by modify pvc. But after the input of this command, when we input map bridge Virtual-Ethernet1, clew that this operation isn’t supported.
[USG2130BSR-atm-pvc-Atm2/0/0-8/35]map bridge Virtual-Ethernet 1
Info:This card does not support this operation.
2. the interface card is single PVC, so the interface ATM no need to configure the pvc 8/35, means that no need to configure the map bridge Virtual-Ethernet1, we can configure the fix IP supplied by the upstream. Root Cause
1. ADSL interface card abnormity
2. Configuration un-correct
3. Equipment not support etc.
Solution
Suggestions
PVC command is used for the multi-PVC of the ATM interface, no need to tie up the VT port.