Got it
Huawei Enterprise Support Community
Community Forums Transmission Network
INSUFFCNT_FLSH_SPACE alar...

INSUFFCNT_FLSH_SPACE alarm - After Upgrade

Created: Oct 20, 2021 20:24:18Latest reply: Oct 23, 2021 14:06:10 351 7 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#

Friends,

After updating the OSN UPS to V100R007C00SPC700 I got the INSUFFCNT_FLSH_SPACE alarm. Remember that via Navigator it is possible to delete unnecessary files and resolve this alarm.

What's the procedure? What files can I delete?


Thank you very much in advance.


osn9800 UPSDWDMFlash Space

Like (0) Dislike (0) Favorite(0) Share Report
Previous: 10GE Service
Next: 9800 ups optical-layer ASON taking too long to switch
Featured Answers

Best answer

Recommended answer

(1) (0)
liqiang185
Admin Created Oct 21, 2021 04:03:28

Dear friend!

The residual files nsf51g.hwx and nsf51a.hwx occupy a large amount of space.

Handling method:

   sftm-delete-file:$sccbid,"ofs1/hwx/nsf51g.HWX"
   sftm-delete-file:$sccbid,"ofs1/hwx/nsf51a.HWX"
   sftm-delete-file:$sccbid,"ofs2/hwx/nsf51g.HWX"
   sftm-delete-file:$sccbid,"ofs2/hwx/nsf51a.HWX"

Run the mon-get-devspace:$sccbid,"ofs1" command to check whether the space used by ofs1 and ofs2 on the board does not exceed 90%. 

Run the alm-get-curdatat-ext command to check whether the alarm is cleared on the NE side. If the alarm persists, perform a warm reset on the active SCC board in the master subrack.


The most thorough solution:

It is recommended that you contact your device vendor to upgrade your device to a later version, such as V100R007C00SPH756.

Please Note that the preceding information is for reference only. Deleting files is risky. You are advised to perform this operation with the remote support of Huawei TAC engineers.


Good luck!

View more
  • x
  • convention：
All Answers
(0) (0)
2#
AndresMoreno
AndresMoreno Admin Created Oct 20, 2021 20:26:04

Hello! Thank you for contacting us.
We are working on an answer for you.
View more
  • x
  • convention：
(0) (0)
3#
wissal
wissal MVE Created Oct 20, 2021 21:00:52

Hello,

INSUFFCNT_FLSH_SPACE

Description

The INSUFFCNT_FLSH_SPACE alarm indicates that the flash file space is insufficient. This alarm is reported when the flash space usage exceeds 90%.

Attribute

Alarm SeverityAlarm Type
CriticalProcessing error alarm

Parameters

When you view an alarm on the network management system, select the alarm. In the Alarm Details field display the related parameters of the alarm. The alarm parameters are in the following format: Alarm Parameters (hex): parameter1 parameter2...parameterN. For details about each parameter, refer to the following table.

NameMeaning
Parameter 1

Indicates the resource type.

  • 0x00: ofs1

  • 0x01: ofs2

Parameter 2

Indicates that the current flash space utilization.

Parameters 3 to 5

These parameters are reserved. Their values are always 0xff.

Impact on the System

File storage to the flash space fails.

Possible Causes

Cause: The file system space on the flash is insufficient.

Procedure

  1. Check the alarm on the NMS for the specific alarmed flash space according to the alarm parameters.

  2. Query the files stored in the alarmed flash space and check for any oversized files or extra files.

  3. Delete oversized and extra files, if any.

  4. Check whether the alarm clears. If the alarm persists, contact Huawei technical support engineers to handle the alarm.

Related Information

None


Detail

https://support.huawei.com/enterprise/en/doc/EDOC1100190477/7159601/insuffcnt_flsh_space


Thanks

View more
  • x
  • convention：
(1) (0)
4#
liqiang185
liqiang185 Admin Created Oct 21, 2021 04:03:28

Dear friend!

The residual files nsf51g.hwx and nsf51a.hwx occupy a large amount of space.

Handling method:

   sftm-delete-file:$sccbid,"ofs1/hwx/nsf51g.HWX"
   sftm-delete-file:$sccbid,"ofs1/hwx/nsf51a.HWX"
   sftm-delete-file:$sccbid,"ofs2/hwx/nsf51g.HWX"
   sftm-delete-file:$sccbid,"ofs2/hwx/nsf51a.HWX"

Run the mon-get-devspace:$sccbid,"ofs1" command to check whether the space used by ofs1 and ofs2 on the board does not exceed 90%. 

Run the alm-get-curdatat-ext command to check whether the alarm is cleared on the NE side. If the alarm persists, perform a warm reset on the active SCC board in the master subrack.


The most thorough solution:

It is recommended that you contact your device vendor to upgrade your device to a later version, such as V100R007C00SPH756.

Please Note that the preceding information is for reference only. Deleting files is risky. You are advised to perform this operation with the remote support of Huawei TAC engineers.


Good luck!

View more
  • x
  • convention：
(0) (0)
5#
Logo_Wooo
Logo_Wooo Created Oct 21, 2021 05:12:25

good\
View more
  • x
  • convention：
(0) (0)
6#
Dilson_Correa
Dilson_Correa Created Oct 21, 2021 18:15:51

Posted by liqiang185 at 2021-10-21 04:03 Dear friend!The residual files nsf51g.hwx and nsf51a.hwx occupy a large amount of space.Handling met ...
Friend,

problem solved.

However, I needed to delete the nsf52g.HWX and nsf52a.HWX files as well.
View more
  • x
  • convention：

liqiang185
liqiang185 Created Oct 22, 2021 01:05:02 (1) (0)
You can run the preceding commands to delete the two files. However, there is a small risk. Exercise caution when performing this operation.  
(1) (0)
7#
smileymind
smileymind Created Oct 23, 2021 14:06:10

Good
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.