Installing RAU BOARD ON OSN 6800
Created: 2 days 20:31Latest reply: Apr 20, 2022 06:38:39
80
4
0
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Dear friend! You can refer to the following figure, which shows the entire process of commissioning the Raman amplifier.
On the NMS, add logical boards--->add logical fiber connections---->configure IPA on the Raman system. When the gain of the Raman amplifier is too small, you need to adjust the gain. Details: Adjusting the Gains for the Raman Board Thank you! |
All Answers
|
Dear friend! You can refer to the following figure, which shows the entire process of commissioning the Raman amplifier.
On the NMS, add logical boards--->add logical fiber connections---->configure IPA on the Raman system. When the gain of the Raman amplifier is too small, you need to adjust the gain. Details: Adjusting the Gains for the Raman Board Thank you! |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
