NOTE:

Blades, disk arrays, and E9000 subracks are packed separately. If there are multiple E9000 servers on site, you can identify which blades and disk arrays belong to the same E9000 server in the following ways.

·       Use the order number on the packing case, which should be consistent for the blades and disk arrays of the same E9000 server. The order number is labeled on the right side of packing cases of blades and disk arrays. Blades and disk arrays using the same order number belong to the same E9000 server.

·       Use the SN of each blade or disk array, which should be unique. Collect SNs of all blades and disk arrays, and contact Huawei technical support engineers. When the expansion spring plate on the left of blades and disk arrays near the edge pops up, you can view and record SNs of blades and disk arrays.

1.     Determine the position the cabinet for installing the S3900/5500 V3/5500 V5 disk array.

2.     Install captive nuts to the corresponding holes(the inner side of the mounting rail in the cabinet)on the upper part of the slide rail on each side of the cabinet.If the guide rail is not installed,install first.

3.     Push the disk array S3900/5500 V3/5500 V5 into the cabinet.

4.     Fix the disk array S3900/5500 V3/5500 V5 in the cabinet.

NOTE:

If the disk array S3900/5500 V3/5500 V5 is fully configured,over two persons are required to carry it for avoidance of any injury.