Installing a Router in a Cabinet (3)

Latest reply: Apr 11, 2014 17:15:38 1638 1 0 0

Procedure

  1. Install mounting brackets to the router.

    Installing a Router in a Cabinet (3)-1223755-1 NOTE:

    The mounting brackets can be installed close to the front panel or the rear panel of the router.

    Use a Phillips screwdriver to fix the mounting brackets to both sides of the router with M4 screws.
    • Figure 1 shows installation of mounting brackets on an AR2220.
    • Figure 2 shows installation of mounting brackets on an AR2240.
    • Figure 3 shows installation of mounting brackets on an AR3260.
    Figure 1 Installing mounting brackets on an AR2220
    Installing a Router in a Cabinet (3)-1223755-2
    Figure 2 Installing mounting brackets on an AR2240
    Installing a Router in a Cabinet (3)-1223755-3
    Figure 3 Installing mounting brackets on an AR3260
    Installing a Router in a Cabinet (3)-1223755-4


  2. Mark the positions of floating nuts and L-shaped guide rails.

    • An AR2220 router is 1 U high, which is the distance between three mounting holes. Mark the mounting holes for L-shaped guide rails and floating nuts with a marker, as shown in Figure 4.
      Figure 4 Positions of floating nuts and L-shaped guide rails for an AR2220
      Installing a Router in a Cabinet (3)-1223755-5
    • An AR2240 router is 2 U high, which is the distance between six mounting holes. Mark the mounting holes for L-shaped guide rails and floating nuts with a marker, as shown in Figure 5.
      Figure 5 Positions of floating nuts and L-shaped guide rails for an AR2240
      Installing a Router in a Cabinet (3)-1223755-6
    • An AR3260 router is 3 U high, which is the distance between nine mounting holes. Mark the mounting holes for L-shaped guide rails and floating nuts with a marker, as shown in Figure 6.
      Figure 6 Positions of floating nuts and L-shaped guide rails for an AR3260
      Installing a Router in a Cabinet (3)-1223755-7


  3. Install floating nuts and L-shaped guide rails on the cabinet.

    Installing a Router in a Cabinet (3)-1223755-8 NOTE:

    The methods of installing floating nuts and L-shaped guide rails to different models are the same. There is a slight difference among the locations of floating nuts and L-shaped guide rails on different models. The following describes how to install floating nuts and L-shaped guide rails on AR2220.

    1. Install the four floating nuts on the mounting holes by using a Phillips screwdriver according to the marked floating nut locations. Two floating nuts are installed on each side. Ensure that the left and right floating nuts are on the same horizontal plane.
    2. Use a Phillips screwdriver to fix L-shaped guide rails to the left and right sides of the cabinet with M5 screws according to the marked L-shaped guide rail locations. Align the bottom edges of the guide rails with the lower edges of the marked mounting holes.
      Figure 7 Install floating nuts and L-shaped guide rails on the cabinet
      Installing a Router in a Cabinet (3)-1223755-9


  4. Install the router into the cabinet.

    1. Move the router into the cabinet, place the router on the L-shaped guide rails, and gently push the router into the cabinet until the mounting brackets are completely attached to the front mounting rails.
    2. Use M6 screws to secure the router onto the cabinet through the mounting brackets.
    • Figure 8 shows AR2220 installation in a cabinet.
    • Figure 9 shows AR2240 installation in a cabinet.
    • Figure 10 shows AR3260 installation in a cabinet.
    Figure 8 Installing an AR2220 into a cabinet
    Installing a Router in a Cabinet (3)-1223755-10
    Figure 9 Installing an AR2240 into a cabinet
    Installing a Router in a Cabinet (3)-1223755-11
    Figure 10 Installing an AR3260 into a cabinet
    Installing a Router in a Cabinet (3)-1223755-12


  • x
  • convention:

Created Apr 11, 2014 17:15:38 Helpful(0) Helpful(0)

Hope useful
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top