Installing a router (4) -----Connecting the Ground Cable

Latest reply: Apr 11, 2014 17:21:56 1475 1 0 0


  1. Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact with your wrist.
  2. Remove the M4 screw from the ground point on the router.

    The ground point is located at the right of the rear panel. Rotate the Phillips screwdriver counterclockwise to loosen the M4 screw, as shown in Figure 1. Keep the M4 screw for later use.

    Figure 1 Removing the M4 screw from the ground point on the router
    Installing a router (4) -----Connecting the Ground Cable-1223853-1

  3. Connect the ground cable.

    Use the M4 screw you just removed to fix the M4 lug of the ground cable to the ground point on the router, and use the M6 screw to fix the M6 lug of the ground cable to the equipotential terminal on the cabinet. See Figure 2.

    Figure 2 Connecting the ground cable
    Installing a router (4) -----Connecting the Ground Cable-1223853-2
  • x
  • convention:

Created Apr 11, 2014 17:21:56 Helpful(0) Helpful(0)

Hope useful
  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Fast reply Scroll to top