Installation third party T/H Sensor with ECC500

Hello,

Prerequisites
A T/H sensor has been added to the ECC500.
You have obtained the ECC500 IP address as well as the user name and password for WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and connected the PC to the ECC500 over a switch.

Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Monitoring > Temp/Hum Group > Temp/Hum35001 > Running Parameter.

Step 3 Set High Temperature Alarm Point, Low Temperature Alarm Point, High Humidity Alarm Point, 

or Low Humidity Alarm Point, and click Submit,

Thanks