Inherit-config

Hello,
We're working on your problem. Please be patient.

You can run the stack member member-id renumber new-member-id [ inherit-config ] command to change the stack member ID.

• If you specify inherit-config, the switch inherits the original stack configuration after it restarts, including the stack priority, stack domain ID, connection mode, and physical member port configuration. The common service port configuration will be lost. For example, the port split configuration will be lost, but the split configuration of physical member ports is inherited.

• If you do not specify inherit-config, the current stack configuration and common service port configuration are lost after the switch restarts, and the configuration related to the new stack member ID in the configuration file takes effect.

• If the configuration file contains offline configuration for the new stack member ID, do not specify inherit-config in the command.

Hi hemin88,
You can run the stack member member-id renumber new-member-id [ inherit-config ] command to change the stack member ID.
- If the inherit-config parameter is specified, the switch inherits the original stack configuration after it restarts, including the stack priority, stack domain ID, connection mode, and physical member port configuration. The common service port configuration, such as the port split configuration, will be lost, but the split configuration of physical member ports will be inherited.
- If the inherit-config parameter is not specified, the current stack configuration and common service port configuration are lost after the switch restarts. The configuration related to the new stack member ID in the configuration file takes effect.
- If the configuration file contains offline configuration for the new stack member ID, do not specify inherit-config in the command.