Issue Description：
The DSP PATCH command is successfully run in the MML Command - CGP window of the client and Check module status is displayed as Inconsistent in the command output.
Possbile reason：
- A patch-related command with forcible parameters is run. For example, in the forcible deletion command RMV PATCH, FORCE is set to YES.
- The patch is not successfully restored when the processes are reset.
Solution :
1. Wait for 10 to 15 minutes, after the processes are reset and the automatic synchronization is complete, run DSP PATCH to display the patch status.
2. Check whether Check module status is Consistent in the command output.
Yes: No further action is required.
No: Go to 3.
3. Use Information Collection Tool to collect items in Common fault analysis scenario.
4. Contact Huawei technical support engineers to rectify the fault.
