In S5700 when configuring voice vlan there is an error says “ no enough resource

Created: Apr 3, 2016 20:01:40Latest reply: Apr 3, 2016 22:36:38 1470 1 0 0 0

In S5700 when configuring voice vlan there is an error said the device does have enough resources ,causing that the reset of
25 ports cannot apply the voice-vlan commands, here is the information :

[S5700-GigabitEthernet0/0/22]voice-vlan 302 enable include-untagged
[S5700-GigabitEthernet0/0/22]interface GigabitEthernet0/0 /23
[S5700 -GigabitEthernet0/0/23]undo voice-vlan 302 enable
[S5700- GigabitEthernet0/0/23]voice-vlan 302 enable include-untagged
Error: This command failed because of no enough resources, please undo it.
From 0/0/1 to 0/0/22 has the same configuration ,the voice-vlan is enabled among these ports without problem ,but when enable the voice vlan in 0/0/23 ,we can see that

An error popped out “Error: This command failed because of no enough resources, please undo it.”

x
convention：
Emotion(0)

Like (0) Dislike (0) Favorite(0) Report

 Previous: Can the S3300 Transparently Transmit PAUSE Frames?

Next: What Is the Object Used for Optical Module Query and Its OID?



(0) (0)

^2#

Selina742 Created Apr 3, 2016 22:36:38

According to the configuration in the S5700, there are 46 OUI configured

voice-vlan mac-address 8483-7100-0000 mask ffff-ff00-0000 description avaya
…
voice-vlan mac-address 0015-6500-0000 mask ffff-ff00-0000 description yealink
voice-vlan mac-address 8cb6-4f00-0000 mask ffff-ff00-0000 description cisco
voice-vlan mac-address e468-a300-0000 mask ffff-ff00-0000 description huawei
…(total 46 items)

If each port configured the “voice-vlan 302 enable include-untagged” , it will take up 46 ACL ,and the total vlan ACL resources for this switch are 1024 ,

So only the front 22 port can configure this command without any error ,because 22*46=1012 ,if continue the same in port 23 , It is not enough since the rest

resources are only 12 , that is why the device show an error ; the solution is to aggregate the OUI or select the OUI that is only match the vendor’s IPPHONE

which are connected to Switch only ,because in customer site ,it is impossible to have more than 40 vendors’ IPPHONE.

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Enterprise

Consumer

Corporate

Carriers

In S5700 when configuring voice vlan there is an error says “ no enough resource

Third Party’s Trade Secret

My Followers