In boardband trunking solutiong，A terminal shows that the terminal has not joined any group

Neil_Tong · Created May 31, 2019 02:57:33

To analyze the problem, perform the following operations:
1. Check whether NEs are configured with correct licenses.
2. Check the terminal registration information and verify whether the terminal has joined the desired group.
3. Check whether the eNodeB is in trunking mode by running the command LST ENODEBMODE.

Neil_Tong · Created May 31, 2019 02:57:33

To analyze the problem, perform the following operations:
1. Check whether NEs are configured with correct licenses.
2. Check the terminal registration information and verify whether the terminal has joined the desired group.
3. Check whether the eNodeB is in trunking mode by running the command LST ENODEBMODE.

In boardband trunking solutiong，A terminal shows that the terminal has not joined any group

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

In boardband trunking solutiong，A terminal shows that the terminal has not joined any group

Best answer

Third Party’s Trade Secret

My Followers