Improve DL User Throughput
Created: May 25, 2021 05:02:46Latest reply: May 25, 2021 05:57:22
667
8
2
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
user_4234445
Created May 26, 2021 03:52:33
(0)
(0)
Hi, Thanks for reply. Please explain why this threshold help improve throughput. 
stephen.xu
Reply user_4234445 Created May 26, 2021 05:47:37
(0)
(0)
The DL throughput of UEs may reach the threshold. As a result, the UEs cannot continue to increase. 
olive.zhao
Reply user_4234445 Created May 26, 2021 06:50:56
(0)
(0)
PdcchPcSwitch: If this option is selected, the service drop rate of CEUs decreases, and the CEU throughput increases. BFModeUserPwrSwitch: Set this option based on the power usage of the live network. If this option is selected, the power increase for beamforming UEs can raise the downlink throughput of such UEs and average cell throughput. However, interference to CEUs may slightly increase. This option applies only to LTE TDD.
olive.zhao
Reply olive.zhao Created May 26, 2021 06:52:19
(0)
(0)
For more information, please check the following document: https://support.huawei.com/hedex/hdx.do?docid=EDOC1100089140&id=CellAlgoSwitch-DlPcAlgoSwitch&lang=en
stephen.xu
Reply Ysf154 Created May 28, 2021 00:49:56
(0)
(0)
There is no impact. Whether increase 1/2/3/4 depends on the user group. 0, DlUserThruputThd0) is the range of index0, [DlUserThruputThd0, DlUserThruputThd1) is the range of index1, and [DlUserThruputThd1 DlUserThruputThd2) is the index2 range, [DlUserThruputThd2, DlUserThruputThd3) is the index3 range, and [DlUserThruputThd3 DlUserThruputThd4) is the index 4 range, and [DlUserThruputThd4, + ≤) is the index 5 range. |
All Answers
user_4234445
Created May 26, 2021 03:52:33
(0)
(0)
Hi, Thanks for reply. Please explain why this threshold help improve throughput.
stephen.xu
Reply user_4234445 Created May 26, 2021 05:47:37
(0)
(0)
The DL throughput of UEs may reach the threshold. As a result, the UEs cannot continue to increase.
olive.zhao
Reply user_4234445 Created May 26, 2021 06:50:56
(0)
(0)
PdcchPcSwitch: If this option is selected, the service drop rate of CEUs decreases, and the CEU throughput increases. BFModeUserPwrSwitch: Set this option based on the power usage of the live network. If this option is selected, the power increase for beamforming UEs can raise the downlink throughput of such UEs and average cell throughput. However, interference to CEUs may slightly increase. This option applies only to LTE TDD.
olive.zhao
Reply olive.zhao Created May 26, 2021 06:52:19
(0)
(0)
For more information, please check the following document: https://support.huawei.com/hedex/hdx.do?docid=EDOC1100089140&id=CellAlgoSwitch-DlPcAlgoSwitch&lang=en
stephen.xu
Reply Ysf154 Created May 28, 2021 00:49:56
(0)
(0)
There is no impact. Whether increase 1/2/3/4 depends on the user group. 0, DlUserThruputThd0) is the range of index0, [DlUserThruputThd0, DlUserThruputThd1) is the range of index1, and [DlUserThruputThd1 DlUserThruputThd2) is the index2 range, [DlUserThruputThd2, DlUserThruputThd3) is the index3 range, and [DlUserThruputThd3 DlUserThruputThd4) is the index 4 range, and [DlUserThruputThd4, + ≤) is the index 5 range. |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
