Hello my friends, I would like to share with you how to insert AP into NCE cloud campus.
1. APs operating in FAT mode, if it is necessary to change to Cloud mode via CLI. Access the AP via Telnet or Console, and run the command "ap-mode-switch cloud"
<HUAWEI> System-view
[HUAWEI] ap-mode-switch cloud
2. After changing from FAT to Cloud operation mode, it is necessary to configure the Controller Address: dev-br.******** and Port number: *****
*Validate controller address and port with Huawei*
Acess the interface web,
, Home > Summary > Deployement Configuration > Agile Controller-Cloud Manager Configuration
After performing the configuration, click “Apply” and then “save” in the upper corner of the screen.
3. Add equipment to the NCE-Cloud Campus platform. Have the ESN/SN of the equipment. This information can be found at the bottom of the equipment or via the web interface (Maintenance > Basic)
follow the path:
Design > Device Management
Choose the site where the device will be inserted, and click on “Add Device”
• Add equipment by model, and then enter its ESN:
Successful
