if you have upsetting alarm in oceanstore and that alarm not effect the storage what you can do to hide this alarm ?

IN this case we should to configure alarm masking as following :

Procedure

1. Log in to DeviceManager.
2. Choose Settings > Alarm Settings.
3. In the left navigation tree, select the Alarm Masking node.
4. View all of the alarms in the system. Table 5-24 describes the related parameters.
   Figure 1 Alarm masking management dialog box
   

   Table 1 Alarm masking parameters

   Parameter	Description
   Name	Indicates the name of an alarm.
   Alarm ID	Indicates the alarm ID.
   Alarm Type	Indicates the system type of an alarm.
   Level	Indicates the severity of an alarm. The possible values are Critical, Major, Warning, and Info.
   Alarm Masking	Enables or disables alarm masking.
   Unhandled Alarms	Indicates whether alarms are cleared in the system or not.