Got it

If Two Switches Are Connected Through a Transport Network Device, How Does a Swi

Latest reply: Mar 13, 2016 23:03:12 1039 1 0 0
If Two Switches Are Connected Through a Transport Network Device, How Does a Switch Detect That the Remote Interface Goes Down?
  • x
  • convention:

TomJ
Created Mar 13, 2016 23:03:12 Helpful(0) Helpful(0)

In V100R005C01SPC100 and later versions, you can configure EFM packet receiving timeout detection on both ends of a link. When receiving an EFM packet times out on one end, a port error-down event is triggered. Then the local end knows that the remote port goes Down.

Run the following commands to enable EFM :

<HUAWEI> system-view
[HUAWEI] efm enable
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] bpdu enable
[HUAWEI-GigabitEthernet0/0/1] efm timeout trigger error-downThe S2300SI does not support the efm timeout trigger error-down command.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.