Got it
Huawei Enterprise Support Community
Community Forums Wireless & Microwave
IBT Antenna

IBT Antenna

Created: Oct 5, 2021 16:17:01Latest reply: Oct 29, 2021 14:54:11 588 9 0 0 0
  Rewarded HiCoins： 0 (problem resolved)
View the author 1#
Hi,

We connected the controlbox with RTN380AX and the IBT antenna.
Like in the installation guide and movie, it must be shown up as CTA (see attached picture) but nothing happens (on both sides.)
On the box only red light is on.
Is there anybody with A solution for this?

Many thanks in advance
Attachment: You need to log in to download or view. No account? Register

Like (0) Dislike (0) Favorite(0) Share Report
Previous: Problems with R017
Next: OPEN CHANNEL failed on E3372
Featured Answers

Best answer

(1) (0)
gzzz
Admin Created Oct 7, 2021 02:39:22

Posted by NL78 at 2021-10-06 16:10 Hi friend, Thanx for answering. The RTN380ax is not connected with POE cable, But with DC power cabl ...

Hello, friend.

The OptiX RTN 380AX V100R020C10 supports the anti-shake function.

If an NE uses an Intelligent Beam Tracing (IBT) antenna, you need to enable the anti-shake function on the NMS.

Prerequisites

NMS user with "NE operator" rights or higher.

Antennas have been aligned.

Background Information

By default, the anti-shake function is disabled on an NE.

Operation Procedure

Enable the anti-shake function.

RTN 380AX

1. If the system indicator is off, check the voltage and polarity of the power supply output to locate the power supply fault.

2. If the system indicator is steady red, check whether the OptiX RTN 380AX is faulty.

1. If the system indicator is off, check the volta

View more
  • x
  • convention：

Recommended answer

(0) (0)
gzzz
Admin Created Oct 6, 2021 02:23:47

Hello friend!

If the STAT indicator is steady red, check whether the outdoor GE network cable between the P&E port on the RTN 380AX and the Ethernet port on the power over Ethernet device is normal and whether the RTN 380AX is faulty.

If the STAT indicator blinks red at an interval of about 1s, check whether the link is disconnected. If the system indicator is steady red, check whether the microwave link and outdoor network cables are normal and whether the RTN 380AX is faulty.

View more
  • x
  • convention：
All Answers
(2) (0)
2#
AndresMoreno
AndresMoreno Admin Created Oct 5, 2021 16:17:48

Hello! Thank you for contacting us.
We are working on an answer for you.
View more
  • x
  • convention：
(0) (0)
3#
gzzz
gzzz Admin Created Oct 6, 2021 02:23:47

Hello friend!

If the STAT indicator is steady red, check whether the outdoor GE network cable between the P&E port on the RTN 380AX and the Ethernet port on the power over Ethernet device is normal and whether the RTN 380AX is faulty.

If the STAT indicator blinks red at an interval of about 1s, check whether the link is disconnected. If the system indicator is steady red, check whether the microwave link and outdoor network cables are normal and whether the RTN 380AX is faulty.

View more
  • x
  • convention：
(0) (0)
4#
NL78
NL78 Created Oct 6, 2021 16:10:55

Hi friend,
Thanx for answering. The RTN380ax is not connected with POE cable, But with DC power cable. From the RTN with USB cable to the control box and 2 USB cables from controlbox to IBM-antenna.
Is this software related? And witch release version support that anti-shake function?
View more
  • x
  • convention：
(1) (0)
5#
gzzz
gzzz Admin Created Oct 7, 2021 02:39:22

Posted by NL78 at 2021-10-06 16:10 Hi friend, Thanx for answering. The RTN380ax is not connected with POE cable, But with DC power cabl ...

Hello, friend.

The OptiX RTN 380AX V100R020C10 supports the anti-shake function.

If an NE uses an Intelligent Beam Tracing (IBT) antenna, you need to enable the anti-shake function on the NMS.

Prerequisites

NMS user with "NE operator" rights or higher.

Antennas have been aligned.

Background Information

By default, the anti-shake function is disabled on an NE.

Operation Procedure

Enable the anti-shake function.

RTN 380AX

1. If the system indicator is off, check the voltage and polarity of the power supply output to locate the power supply fault.

2. If the system indicator is steady red, check whether the OptiX RTN 380AX is faulty.

1. If the system indicator is off, check the volta

View more
  • x
  • convention：
(0) (0)
6#
Saqib123
Saqib123 Created Oct 8, 2021 09:31:45

Issue Resolved Successfully.
Thank You.
View more
  • x
  • convention：
(0) (0)
7#
NL78
NL78 Created Oct 14, 2021 12:40:39

Posted by gzzz at 2021-10-07 02:39 Posted by NL78 at 2021-10-07 02:39 Hi friend, Thanx for answering. The RTN380ax is not connected ...
Many thanks gzzz!! It was indeed software related! Problem solved!
View more
  • x
  • convention：

gzzz
gzzz Created Oct 14, 2021 13:16:00 (0) (0)
You're welcome.  
(0) (0)
8#
Unicef
Unicef MVE Created Oct 21, 2021 14:49:21

Good answer
View more
  • x
  • convention：
(0) (0)
9#
Majdi.Chebil
Majdi.Chebil Moderator Author Created Oct 29, 2021 14:54:11

Helpful answer! Thank you folks
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.