Dear Sir
I need you assitance i want to change the FAT TO FIT AP, i have the tftp and i have the said firmware as well, my problem is ap mode switch is giving me
error although i have sftp setup in my laptop. but i cannot go further any more .please help .
look at this
Error 1 )
[huawei]ap-mode-switch fat
^
Error: Unrecognized command found at '^' position.
Error 2 )
Enter system view, return user view with Ctrl+Z.
[huawei]ap-mode-switch check
^
Error: Unrecognized command found at '^' position.
the system info
Image Status Version============================================================== Image A (Active) AP7X10XN V200R003C00SPC300B073
Section Active Reboot active
--------------------------------------------------------------
AP Mode : dhcp static
Ip Address : - 192.168.2.10
Ip Version : - 4
Mask : - 255.255.255.248
Gateway : - -
AC 0 ip : - 192.168.3.10
AC 1 ip : - 192.168.3.111
AC 2 ip : - -
AC 3 ip : - -
================================================
DISPLAY VERSION DETAILS
<huawei>display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.130 (AP7110DN FIT V200R003C00SPC300)
Copyright (C) 2011-2013 HUAWEI TECH CO., LTD
Huawei AP7110DN Router uptime is 0 week, 0 day, 6 hours, 38 minutes
MPU 0(Master) : uptime is 0 week, 0 day, 6 hours, 38 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 32 M bytes
MPU version information :
1. PCB Version : H87D2TT1D200 VER.C
2. MAB Version : 0
3. Board Type : AP7110DN
4. BootROM Version : 79
