16.1 Terminal Management
16.1.1 STA Management
Context
On the STA Management page, you can view information about STAs such as the MAC addresses, IP addresses, and radio modes.
Procedure
- Check STA information.
- Choose .
- Set Search and the query criteria, and click Go. You can view information about found STAs. Click details on the right of the STA's MAC address to check STA information. Table 16-1 describes STA parameters.
Table 16-1 STA parametersParameter
Description
MAC address
MAC address of a STA.
IP Address
IP address of a STA.
AP ID
ID of the AP that a STA associates with.
SSID
SSID that a STA associates with.
Radio mode
Radio mode used by a STA.
VLAN ID
Service VLAN of a STA.
Access Channel
Channel used by a STA.
Online Time
STA online duration.
User Name
User name of a STA.
Frequency Band
Radios on an AP that STA can access.
Received Bytes
Bytes received by a STA from an AP.
Transmit Bytes
Bytes transmitted by a STA to an AP.
Uplink SNR
Upstream signal-to-noise ratio (SNR) of a STA.
Uplink Receiving Power
Upstream receive power of a STA.
Signal Intensity
Strength of radio signals received by a STA.
Authentication Mode
Authentication mode used by a STA.
Encryption Mode
Encryption mode used during data transmission between a STA and an AP.
- Force STAs to log out.
- Choose
- Set Search and the query criteria, and click Go. You can view information about found STAs. Click on the right of the STA's MAC address to force the STA to log out.
16.1.2 STA Statistics
Procedure
- Choose .
- Enter the ID of the AP you want to query in AP ID and click Go to search STAs connected to the specified AP. For description of the parameters, see Table 16-2.Table 16-2 STA parameter description
Item
Description
AP ID
Specifies the AP ID.
Total Number Of Users
Indicates the number of STAs connected to the AP.
Number Of 2.4 GHz Users
Indicates the number of STAs connected to the 2.4 GHz radio of the AP.
Number Of 5 GHz Users
Indicates the number of STAs connected to the 5 GHz radio of the AP.
16.1.4 Offline User Information
Procedure
- Choose .
- Set Search and the query criteria, and click Go. You can view information about found STAs. Table 16-4 describes STA parameters.Table 16-4 Offline User parameters
Parameter
Description
User Name
Name of the offline user.
MAC Address
MAC address of the offline user.
IP Address
IP address of the offline user.
Authentication Mode
Authentication mode for the offline user.
Domain Name
Authentication domain of the offline user.
Logout Cause
Cause for the user's logout.
Interface
Interfaces connected to the offline user.
VLAN
Service VLAN of the offline user.
Online Time
Login time of the offline user.
Offline Time
Logout time of the offline user.
16.1.5 STA Blacklist/Whitelist
Context
- A whitelist contains MAC addresses of STAs that are allowed to connect to a WLAN. After the whitelist function is enabled, only the STAs in the whitelist can connect to the WLAN, and access from other STAs is rejected.
- A blacklist contains MAC addresses of STAs that are not allowed to connect to a WLAN. After the blacklist function is enabled, STAs in the blacklist cannot connect to the WLAN, and other STAs can connect to the WLAN.
If the whitelist or blacklist is empty, all STAs can connect to the WLAN.
The configurations of STA blacklist and whitelists are the same. The following describes the configuration of STA whitelist as an example.
