Huawei Switch port limit on WDM
- x
- convention：
- Emotion(0)
|
Dear friend! You can configure the required services on the TEM28. Step 1: Set the working mode of the TEM28 board. One internal port corresponds to one VCTRUNK. A total of five VCTRUNKs need to be set.
Step 2: Activate the physical port. The first four ports have 10 Gbit/s bandwidth.
Step 3: Create five ODU0 cross-connections. After the peer site is configured, trails can be searched out.
Step 4: Configure E-Line services.
Bind five VCTRUNKs at one port.
Perform the same configuration on the opposite station. Thanks! |
|
|
Dear friend! You can configure the required services on the TEM28. Step 1: Set the working mode of the TEM28 board. One internal port corresponds to one VCTRUNK. A total of five VCTRUNKs need to be set.
Step 2: Activate the physical port. The first four ports have 10 Gbit/s bandwidth.
Step 3: Create five ODU0 cross-connections. After the peer site is configured, trails can be searched out.
Step 4: Configure E-Line services.
Bind five VCTRUNKs at one port.
Perform the same configuration on the opposite station. Thanks! |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
