Question
What can I do if I forget the IP address of the management port in a storage array?
Answer
V3 devices do not support IP address initialization.
If you have forgotten the IP address, you can log in to the storage device using a serial port, run the show system management_ip command to query the IP address of the management port, and run the admin:/>change system management_ip eth_port_id=CTE0.A.MGMT ip_type=ipv4_address ipv4_address=XXX.XXX.XXX.XXX mask=XXX.XXX.XXX.XXX gateway_ipv4=XXX.XXX.XXX.XXX command (modify parameter values based on your situation).
