Huawei microwave equipment provides a maximum of 20 Gbit/s capacity by using microwave technologies such as CA (carrier aggregation), MIMO (multiple-input multiple-output technology), common microwave frequency band, and E-band realize dual-frequency microwave, through the combination of "1" dual-frequency antenna + "2" (6-86GHz) RF units of any frequency band.
Using Huawei’s next-generation chips and optimization algorithms, the ultra-low latency of 25us/ sites is achieved. In addition, Huawei's all-cloud network architecture greatly improves network operation efficiency, implements intelligent network O&M, and meets the requirements for bearing new 5G services.
In a 4G/4.5G continuous development and expansion scenarios, microwave can be smoothly upgraded based on existing-network devices. With the CA function and modular antenna application, the capacity can be increased and the network construction cost can be reduced by more than 30% for customers.
Huawei microwave technology applies the microwave technology to the 4G/4.5G network in advance, improving the bearer capability of the 4G/4.5G network and preparing for smooth evolution to the 5G.
The Huawei RTN 310/320 is a full-outdoor microwave transmission device. It connects to service devices through GE ports and supports zero footprint installation, reducing network deployment costs.
RTN 320 supports split mounting and direct mounting, and can share antennas and XMC ODUs with RTN 900.
Ultra-broadband, High Spectral Efficiency, Max 2 Gbit/s per Carrier
112 MHz channel spacing, 4096QAM modulation, and up to 2 Gbit/s throughput per carrier, meeting different backhaul requirements.
Adaptive modulation (AM), which increases link capacity while assuring high availability of high-priority services
Ethernet Frame Header compression, further enhancing spectral efficiency and packet service throughput over the air interface
Easy Deployment, Easy OAM
Full outdoor architecture, allowing zero footprint installation
USB flash drive for commissioning and quick configuration, enabling plug and play on site, thereby lowering engineering costs and improving deployment efficiency
Wi-Fi maintenance port, allowing for contact-free maintenance, lowering maintenance costs
Comprehensive Ethernet Capability
Supporting E-Line or E-LAN services
Supporting 8-level QoS, empowering service-aware networks and guaranteeing the transmission quality of high-priority services
Supporting the link aggregation group (LAG) feature
Supporting ETH OAM, enabling SDH-like maintenance on IP networks and improving maintenance efficiency of microwave networks
Supporting Synchronous Ethernet and IEEE 1588v2, meeting the synchronization requirements of wireless and IP networks
Easy Full Outdoor Reconstruction, Smooth Evolution
In full outdoor microwave reconstruction projects, RTN 320 can share antennas, couplers, and XMC ODUs with RTN 900, which can effectively protect operators' initial investment.
Customers can first deploy 1+0 and later upgrade to 2+0, XPIC, and MIMO dual-channel application. This improves bandwidth and spectral efficiencies, helping save initial investment and reduce TCO.
