Hi there, everyone!
This post features a Huawei HG8245 ONT port mapping guide. Please have a read at the information available for you below.
ONT DESCRIPTION
The EchoLife HG8245, an Optical Network Terminal (ONT), is a high-end home gateway in the Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home and SOHO users.
The HG8245 provides two POTS ports, four GE/FE auto-adapting Ethernet ports and one Wi-Fi port. The HG8245 features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services.
Therefore, the HG8245 provides a perfect terminal solution and future-oriented service supporting capabilities for FTTH deployment.
Also, it matches with the below product with the same function:
Product Name | Product Version |
|---|---|
| EchoLife HG8040/HG8240/HG8242/HG8245/HG8247/HG8247a | V100R006C00&C01 |
PORT MAPPING CONFIGURATION
1. In the navigation tree on the left, choose . In the pane on the right, click New. In the dialog box that is displayed, set the parameters related to port mapping, as shown in Figure 1.
2. Click Apply.
Port mapping indicates that the Intranet server is allowed to be open to the Extranet (for example, the Intranet provides the Extranet with a WWW server or FTP server). Port mapping is to map the Intranet host IP address and port ID to the Extranet IP address and the corresponding port ID so that users from Extranets can access the Intranet server.
With port mapping, the users cannot see the Intranet IP address. They see the Extranet IP address.
Table 1 describes the parameters related to port mapping.
Parameter | Description |
|---|---|
Enable Port Mapping | Indicates whether to enable port mapping. |
WAN Name | Indicates the name of the WAN interface where port mapping is enabled. |
Protocol | Indicates the protocol type of port mapping packet, which may be TCP, UDP, or TCP/UDP. |
Start External Port | Indicates the destination start port of the external data packet. |
End External Port: | Indicates the destination end port of the external data packet. |
Start Internal Port | Indicates the internal destination start port of the port mapping packet. |
End Internal Port | Indicates the internal destination end port of the port mapping packet. |
Start External Source Port | Indicates the source start port of the external data packet. |
End External Source Port | Indicates the source end port of the external data packet. |
Mapping Name | Indicates the name of the port mapping rule. |
External Source IP Address | Indicates the source IP address of the external data packet. |
Internal Host | Indicates the IP address of the host to which the port is mapped. |
Please refer to the below link for more information:
That would be all on the Huawei HG8245 ONT port mapping guide. Thanks for reading!
