Huawei FusionCompute installation – Section 1a (Host installation)
Hi,
I will continue with the host(CNA) installation.
First of all, we download our iso file to our computer by selecting it as below.
The next step is to show the iso file we downloaded over “ibmc”(intelligent baseboard management controller) to server as below and make it boot with this file.
Log in with username and password
Click start at the bottom right
Click HTML5 integrated remote console (Open console)
Show iso file by clicking on the three dots from the section with the cd icon above.
Click “Connect”
After clicking Connect,screen should appear as below.
Then click on the CD/DVD section under the B (boot) icon to set the server to start with this iso file.And reboot the server using power ico.
After the server restarts, select the “installation” and continue.
Continue on the hard drive by pressing enter and then edit
Let's continue with OK by selecting the corresponding disk here.
Be careful and continue with "Yes"
My disk is over 2 TB, so I am getting a warning like this, it may not appear in your scenario.(Continue by pressing enter button on the OK)
In the next article,continue with the network section
