Huawei FitAP AP6510DN-AGN Power Issue

<AC6605> system-view
[AC6605] wlan
[AC6605-wlan-view] ap-id 1
[AC6605-wlan-ap-1] radio 0
[AC6605-wlan-radio-1/0] eirp 27

@kmyd @撒么 @网络管理员Lemon please help

thank you sir for the response! however the configuration that you have stated was for the AC. my question is if the leaf radio has not yet been connected to its root radio due to different factors (i.e. obstruction, power etc.) are there any way we could configure the leaf radio itself not the AC to its max power of 27 dbm?

i understand that the FitAP AP6510DN-AGN get its configuration from the AC.

to give you a background with our currently deployed system, we are using WDS System. Bunch of Leaf AP are connected to Root APs. Some Leaf APs have successfully connected to the Root APs while some Leaf APs have not been able to connect to the Root APs. We were thinking of tinkering with the configuration of the Leaf APs that have not yet connected to the Root APs maybe by increasing its power, etc.

We then checked the currently configured power on our Leaf APs and found out that they were only using 20 dbm power (please see my first post). We thought that maybe by increasing the power would make some Leaf APs to finally connect to the Root APs.

So that is my question, are there any configurations could be made on the radio itself not on the AC that would make the power of the radio to maximum of 27 dbm based on its datasheet.

up!

this is not yet solved, please help. thanks!