Huawei eSpace 7950

First you have to make a username and password on CUCM and assign these credentials to the IP phone via LCD screen or via web page from Advanced > Account

Second , you have to put the IP of the CUCM and the port for authentication on the phone LCD screen or from the IP phone web page from Step Advanced > Server

From 7950 side i think it is not complex, you only need Set ID(UN) and PW for logging which is created on CUCM. also In 7950 configure network settings according to guideeSpace 7910&7950 Product Documentation

But the most important i think is from CUCM side. as when you add 7950 you need add as Third party SIP phone, which is different from Adding Cisco phone.
this means you need double confirm configuration first from CUCM side.
you can test the configuration you made to CUCM by logging to Third Part phone.

is your issue resolved Sir

Hello All,

i really appreciate your replies, however i still do not have a working IP phone...

further more, i have done all that need to be done on the CUCM but i still need to login to the espace 7950 GUI so i can synch the same parameter on the CUCM on the eSpace 7950.

please anyone has documentation on login details or default login details through GUI for this IP phone model ?

please!!!

please can you share the link for the default login credentials for the espace 7950 IP phone

for webpage The default administrator account is admin, and the default administrator password is admin123.

Sir is your problem has been solved and you can refer to this guide at the below link
http://support.huawei.com/enterprise/en/doc/EDOC1000129167

hello sir,
we resume this case again, still having issue configuring this Huawei Ip phone to work with cisco call manager
the above site you sent does not included the integration with cisco call manager