Got it

Huawei AP Configuration Under Ac - 6005-8

Created: Jul 21, 2020 13:13:49Latest reply: Jul 25, 2020 04:29:42 754 12 0 0 0
  HiCoins as reward: 0 (problem unresolved)

Hi,


I'm looking for help to configure the Access Point Huawei AP5030DN-S. We have an AC 6005-8 here to manage all our warehouse AP's and office AP's. I want to put this new AP under Office AP group. When i tried to access the AP, it is showing AP is in fit mode (managed by AC). I need help to add this new AP under our AC in office AP group.

Featured Answers

Recommended answer

chenhui
Admin Created Jul 22, 2020 13:30:17

Posted by Ansal at 2020-07-22 09:21 Hi Bro,CLI of the AC is showing disabled, So, i tried to add the AP through web interface, Configu ...
Hi Ansal,
Based on your description, I think, that your DHCP service is enabled on the interface vlanif 200. You might try add the switch interface which the new AP connects to the vlan 200, so that the AP could get the IP address correctly.
Then configure the AP online again.
Please let us know if that helps.
View more
  • x
  • convention:

All Answers

Hi, 

From your description, I think you have some APs works fine and you are just trying to add a new AP into the existing office AP group. If I'm right, just refer to the example below:

[AC6605] wlan
[AC6605-wlan-view] ap-id 11 type-id 19 ap-mac 0025-9e07-8270
[AC6605-wlan-ap-0] ap-group office


Or, you can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1000153688&id=dc_cfg_wlan_basic_0018&lang=en

View more
  • x
  • convention:

Hi bother,
Thanks for the help!

We have multiple VLAN network configured in Huawei Switch. AC and AP's are connected under VLAN 200, So, i need to bring this new AP under VLAN 200, to configure it ?

Also i can see a couple of VLAN in AC like, 24,32,40,46,200,202. Can you explain why these VLAN's
created in AC.? I can see some VLAN in common with our network.
View more
  • x
  • convention:

Posted by chenhui at 2020-07-21 13:16 Hi, From your description, I think you have some APs works fine and you are just trying to add a ne ...
Hi bother,
Thanks for the help!

We have multiple VLAN network configured in Huawei Switch. AC and AP's are connected under VLAN 200, So, i need to bring this new AP under VLAN 200, to configure it ?

Also i can see a couple of VLAN in AC like, 24,32,40,46,200,202. Can you explain why these VLAN's
created in AC.? I can see some VLAN in common with our network.
View more
  • x
  • convention:

Posted by chenhui at 2020-07-21 13:16 Hi, From your description, I think you have some APs works fine and you are just trying to add a ne ...
Hi Bro,

CLI of the AC is showing disabled, So, i tried to add the AP through web interface, Configuration -
AP Going Online - Manually add -- filled all the details of new AP. Clicked "authenticate" shows execution succeeded. But the status of the AP showing idle. Is this happening beacause of VLAN ?
View more
  • x
  • convention:

Posted by Ansal at 2020-07-22 09:21 Hi Bro,CLI of the AC is showing disabled, So, i tried to add the AP through web interface, Configu ...
Hi Ansal,
Based on your description, I think, that your DHCP service is enabled on the interface vlanif 200. You might try add the switch interface which the new AP connects to the vlan 200, so that the AP could get the IP address correctly.
Then configure the AP online again.
Please let us know if that helps.
View more
  • x
  • convention:

Also i can see a couple of VLAN in AC like, 24,32,40,46,200,202. Can you explain why these VLAN's
created in AC.? I can see some VLAN in common with our network.

Answear: you have mulotiple vlans in WLAN because is necesary, one for service, one for manage, one for access.
View more
  • x
  • convention:

Posted by chenhui at 2020-07-22 13:30 Hi Ansal,Based on your description, I think, that your DHCP service is enabled on the interface vl ...
Hi,

@chenhui,

Thanks bro! It worked :)

I added the switch port to the same vlan and AP is working. Now the status is showing vermismatch (I figured the versions are different)

V200R007C20SPC500 : New AP version
V200R008C10SPCe00 : Existing AP version (old)

Also the powesupply status is not showing (--) . Can you help in these?
View more
  • x
  • convention:

Posted by vestrada at 2020-07-22 15:26 Also i can see a couple of VLAN in AC like, 24,32,40,46,200,202. Can you explain why these VLAN'scre ...
Hi @vestrada,

Thanks for the reply.
View more
  • x
  • convention:

Posted by Ansal at 2020-07-23 09:54 Hi,@chenhui, Thanks bro! It worked :)I added the switch port to the same vlan and AP is working. ...
Hi,
Please check the version of the AC, I think, the AC version is not matched with the V200R007C20.
Please upload the AC version, I'll help to check that.
Actually, the easiest way is upgrade the new AP to the version V200R008C10.
View more
  • x
  • convention:

12
Back to list

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.