Huawei and mikrotik mpls transport

Created: Mar 13, 2019 20:48:20Latest reply: Apr 10, 2019 10:00:08 774 11 0 0
  Rewarded Hi-coins: 0 (problem resolved)

Hello!


friends I have a rde mpls Huawei, I need to close a transport of vpls per ldp with mikrotik, anyone have any tips?



  • x
  • convention:

Featured Answers
chenhui
Admin Created Mar 18, 2019 06:02:58 Helpful(0) Helpful(0)

Posted by leo3101 at 2019-03-15 20:12 HelloFigure 01 did not succeedFigure 02 I was successful I believe that you are configuring incorrec ...
if you are searching the configuration command for martini vpls, please refer the below:
first create VSI and configure LDP as the signalling
system-view
vsi xx static
pwsignal ldp
vsi-id yy // the vsy-id must match the vsi-id configured on the remote-peer
peer x.x.x.x
second, bind the customer edge interface to vsi
system-view
interface x/x/x
l2 binding vsi xx // xx is the vsi name configured before.
  • x
  • convention:

All Answers
chenhui
chenhui Admin Created Mar 14, 2019 00:39:14 Helpful(0) Helpful(0)

@leo3101 hi, I'm not understanding rde mpls, could you describe it more detailed?
  • x
  • convention:

chenhui
chenhui Admin Created Mar 14, 2019 01:46:51 Helpful(0) Helpful(0)

what's your meaning by saying close transport of vpls per ldp?
  • x
  • convention:

leo3101
leo3101 Created Mar 14, 2019 13:02:52 Helpful(0) Helpful(0)


345/5000
Hello friends!
I am trying to do via ldp, get to establish mpls ldp between the mikrotik and Huawei S6720 I get the transport between the mikrotik that are closing in another point of the network that closes peer mpls with another s6720 can do vpls between the mikrotik per ldp but between Huawei and mikrotik can not establish tunnel vpls ldp
  • x
  • convention:

chenhui
chenhui Admin Created Mar 15, 2019 13:10:43 Helpful(0) Helpful(0)

Posted by leo3101 at 2019-03-14 13:02 345/5000Hello friends! I am trying to do via ldp, get to establish mpls ldp between the mikrotik an ...
sorry but I don't really understanding...
maybe you can drawing a simple topology to explain it
  • x
  • convention:

leo3101
leo3101 Created Mar 15, 2019 20:12:31 Helpful(0) Helpful(0)

MPLS

Hello

Figure 01 did not succeed

Figure 02 I was successful I believe that you are configuring incorrectly, what would be the correct configuration for this scenario?
tete performed with VSI does not succeed




This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Diaa_Mohamed
Diaa_Mohamed Created Mar 17, 2019 14:04:57 Helpful(0) Helpful(0)

This link may help you, From WIKI Mikrotik Huawei and mikrotik mpls transport-2890669-1
https://wiki.mikrotik.com/wiki/Manual:MPLSVPLS
  • x
  • convention:

Best Regards
IP Data communication TAC Middle East
leo3101
leo3101 Created Mar 18, 2019 01:01:22 Helpful(0) Helpful(0)

hello!

configure on mikrotik already know how to do, now the part of Huawei that I do not know how to do so I can establish with mikroti
k in the correct way
  • x
  • convention:

chenhui
chenhui Admin Created Mar 18, 2019 02:13:44 Helpful(0) Helpful(0)

Posted by leo3101 at 2019-03-15 20:12 HelloFigure 01 did not succeedFigure 02 I was successful I believe that you are configuring incorrec ...
are you mean that the martini vpls tunnel can't established between S5720 and Mikrotic?
  • x
  • convention:

chenhui
chenhui Admin Created Mar 18, 2019 06:02:58 Helpful(0) Helpful(0)

Posted by leo3101 at 2019-03-15 20:12 HelloFigure 01 did not succeedFigure 02 I was successful I believe that you are configuring incorrec ...
if you are searching the configuration command for martini vpls, please refer the below:
first create VSI and configure LDP as the signalling
system-view
vsi xx static
pwsignal ldp
vsi-id yy // the vsy-id must match the vsi-id configured on the remote-peer
peer x.x.x.x
second, bind the customer edge interface to vsi
system-view
interface x/x/x
l2 binding vsi xx // xx is the vsi name configured before.
  • x
  • convention:

12
Back to list

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login