Hi, everyone!
The post will share with you how to install and replace the components on 5288X V5 Server.
Removing the Server from L-Shaped Guide Rails or Static Rail Kit
Removing the Server from the Ball Bearing Rail Kit
Installing and Replacing the Server on L-Shaped Guide Rails or Static Rail Kit
Installing and Replacing the Server on the Ball Bearing Rail Kit
Installing and Replacing the L-Shaped Guide Rails
Installing and Replacing the Ball Bearing Rail Kit
Installing and Replacing the Chassis Cover
Installing and Replacing the Front SAS-SATA Drive
Installing and Replacing the Rear SAS-SATA Drive
Installing and Replacing the AC PSU Cable
Installing and Replacing the DC PSU Cables
Installing and Replacing the AC PSU
Installing and Replacing the DC PSU
Installing and Replacing the Fan Module
Installing and Replacing the PCIe RAID Controller Card
Installing and Replacing the Supercapacitor (Server with a PCIe RAID Controller Card)
Installing and Replacing the Processor
Installing and Replacing the Memory Module
Installing and Replacing the TPM-TCM
Installing and Replacing the OCP 2.0 Mezzanine Card
Installing and Replacing the Front-Drive Backplane
Installing and Replacing the 2 x 3.5- Rear Drive Module
Installing and Replacing the 4 x 2.5- Rear Drive Module
Installing and Replacing the Module with Rear Drives and PCIe Card
Installing and Replacing the 12 x 3.5- Rear-Drive Backplane
Installing and Replacing the External USB Flash Drive
Installing and Replacing the Built-in USB Flash Drive
Installing and Replacing the Battery
Installing and Replacing the Left Mounting Ear Board
Installing and Replacing the Right Mounting Ear Board
Installing and Replacing the PCIe Card
Installing and Replacing the PCIe Riser Module
Installing and Replacing the Front Bezel
Installing and Replacing the Air Duct
Installing and Replacing the Mainboard
Welcome to watch.
