How to view the U2980 configuration information?

user_2890249_Manish · Created Sep 25, 2019 03:38:21

Hi user_3498869!

I am using U2980 in our project. Follow the below steps to download the current configuration of you U2980:

1. log in to the U2980 device using 'CDE OMU LMT Client' tool as admin;

2. run this command: CVT MML;

3. use WinSCP to access filesystem of U2980 OMU board;

4. go to the path /opt/HUAWEI/cgp/workshop/omu/share/export/mit/mml;

5. download file ALLME_***.txt. This contains all the configurations on your U2980 device.

Refer to the attached screenshot.

Regards,

Manish Pal

manishkp27@gmail.com

IPCC Expert

This article contains more resources

You need to log in to download or view. No account? Register

x

Alexandru · Created Sep 23, 2019 10:49:01

I haven't used this device much, and I want to know how to do it.

Hike · Created Sep 23, 2019 11:06:29

Hi, user_3498869
I did not find the U2980 operation guide, but I found the eSpace U1900 V200R003C50 LMT Operation Guide (chm). Maybe some of the operations are generic.

The following may help you.

LMT can collect system information, fault information, and black box information, to facilitate system troubleshooting.

8.1 Device Information
This topic describes how to collect system and fault information to facilitate system troubleshooting.
8.2 Blackbox Information
The black box information contains the basic system information including restart logs, basic information, and running status. The black box information helps locate and analyze faults.
8.3 Trunk Information
This function allows users to collect the configuration and status information about common trunks, such as SIP, SS7, PRA, R2, and AT0.
8.4 Diagnostic Information Collection
A button is provided to quickly obtain all information including the system information, fault information, black box information, operation logs, run logs, and alarm information. The information obtained helps fault analysis and locating.
8.5 Custom Configuration Information Collection
This function helps you quickly collect required command line information.
8.6 AT0 Trunk Record Collect
This function helps you collect AT0 trunk recording files for analyzing and locating system faults.
8.7 Message Collect
This function helps you collect voice message files for analyzing and locating system faults.

user_2890249_Manish · Created Sep 25, 2019 03:38:21

Hi user_3498869!

I am using U2980 in our project. Follow the below steps to download the current configuration of you U2980:

1. log in to the U2980 device using 'CDE OMU LMT Client' tool as admin;

2. run this command: CVT MML;

3. use WinSCP to access filesystem of U2980 OMU board;

4. go to the path /opt/HUAWEI/cgp/workshop/omu/share/export/mit/mml;

5. download file ALLME_***.txt. This contains all the configurations on your U2980 device.

Refer to the attached screenshot.

Regards,

Manish Pal

manishkp27@gmail.com

IPCC Expert

This article contains more resources

You need to log in to download or view. No account? Register

x

How to view the U2980 configuration information?

Best answer

Recommended answer

This article contains more resources

This article contains more resources

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

How to view the U2980 configuration information?

Best answer

Recommended answer

This article contains more resources

This article contains more resources

Third Party’s Trade Secret

My Followers