The method to view the elabel of the IAD
You can view the MAC address in the following ways:
IAD101/102/104H, IAD208E(M) and IAD132E(T) :
Log in to the CLI, and run the enable and configure terminal commands in sequence to enter the global configuration mode. Then run the display elabel command.
IAD1224 :
Log in to the CLI, and run the enable and configure terminal commands in sequence to enter the global configuration mode. Then run the following commands:
- For the CVP, run the display elabel cvp command.
- For the backboard, run the display elabel backboard command.
- For the ASI or OSU board, run the display elabel pots command.
