How to verify if there is traffic into in an interface

267 0 0 0
When the device is connected to a network, you can use the command display interface in order to view the interface bytes counters for inbound and outbound.

So, issue the command

reset counters interface [ interface-type [ interface-number ] ]

And after that, verify again.

The counters will reflect the statitics according to how much traffic is passing trough.

It is suggested not to make any chagne if considerable traffic is passing. Otherwise, you may take the decission to proceed.


# Clear traffic statistics on all interfaces.

<HUAWEI> reset counters interface

# Clear traffic statistics on VLANIF10.

<HUAWEI> reset counters interface vlanif 10
  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits