This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
How to use stacking QinQ ...

How to use stacking QinQ VLAN mapping

Latest reply: Nov 28, 2018 17:42:27 363 6 4 0
display all floors #1

How to use stacking QinQ VLAN mapping

 

[Problem Analysis]

 the example configuration is as below：

interface GigabitEthernet1/1/xx

 port link-type hybrid

 port hybrid untagged vlan xxx

 port vlan-stacking vlan 36 stack-vlan xxx

 port vlan-stacking vlan 123 stack-vlan xxx

 port vlan-stacking vlan 964 stack-vlan xxx

 port vlan-stacking vlan 1999 stack-vlan xxx

 

interface GigabitEthernet1/2/xx

 port link-type hybrid

 port hybrid untagged vlan xxx

 port vlan-stacking vlan 36 stack-vlan xxx

 port vlan-stacking vlan 123 stack-vlan xxx

 port vlan-stacking vlan 964 stack-vlan xxx

 port vlan-stacking vlan 1999 stack-vlan xxx

 

interface GigabitEthernet1/3/xx

 port link-type hybrid

 port hybrid untagged vlan xxx

 port vlan-stacking vlan 36 stack-vlan xxx

 port vlan-stacking vlan 123 stack-vlan xxx

 port vlan-stacking vlan 964 stack-vlan xxx

 port vlan-stacking vlan 1999 stack-vlan xxx

 

First，doing the map VLAN user_vlan to VLAN xxx

Second，doing the stacking QinQ encapsulate VLAN xxx

[Solution Description]

 

Example map VLAN source_vlan to VLAN  destination_vlan ，and then encapsulate the VLAN stacking_vlan

 

 vlan  destion_vlan

 

port vlan-mapping source_vlan  map-vlan  destination_vlan

 

port vlan-stacking vlan destination_vlan  stack-vlan stacking_vlan

  • x
  • convention：

Helpful (4) Favorite(0) Share Report
Created Nov 13, 2018 18:38:05 Helpful(0) Helpful(0)

hi author , can you help make more clear about this stacking QinQ VLAN mapping ? If the manual has detailed examples and instructions above, please share a connection with us. Thanks for your sharing this example , you are a good guy . hope we can discussing detail situation issue .
  • x
  • convention：
Created Nov 14, 2018 09:15:45 Helpful(0) Helpful(0)

The basic QinQ, also known as the QinQ Layer 2 tunnel, is implemented based on the interface. After the basic QinQ function is enabled on the interface, the device adds the VLAN tag of the default VLAN of the interface to the interface. If a packet with a VLAN tag is received, the packet becomes a dual-tag packet. If the packet is received without a VLAN tag, the packet becomes the default VLAN tag of the interface. Message.
  • x
  • convention：
Created Nov 14, 2018 09:40:23 Helpful(0) Helpful(0)

QinQ encapsulation changes a single-tagged packet into a double-tagged packet, and is usually performed on underlayer provider edge (UPE) interfaces connected to customer networks.

Depending on the data encapsulated, QinQ encapsulation is applied as interface-based or flow-based QinQ encapsulation. Additionally, QinQ encapsulation can be performed on routed sub-interfaces.
if you can share more details about QinQ and stack ,it's very wonderful .
  • x
  • convention：
Created Nov 15, 2018 15:13:10 Helpful(0) Helpful(0)

The qinq protocol command sets the TPID value in the outer VLAN tag of an interface.

The undo qinq protocol command restores the default TPID value in the outer VLAN tag.

By default, the TPID value in the outer VLAN tag is 0x8100.

is this right?
  • x
  • convention：
Created Nov 26, 2018 22:23:22 Helpful(0) Helpful(0)

In the access environment of operators, it is often necessary to differentiate users'needs according to their applications or access locations or devices. VLAN Stacking can mark the corresponding outer Tag to the user message according to the Tag or IP/MAC of the user message, in order to distinguish different users.
The VLAN Stacking port has the following characteristics:
Ports with VLAN Stacking function can be configured with multiple external VLANs, and ports can add different external Tags to different VLAN frames.
The port with VLAN Stacking function can add an outer Tag to the frame when receiving the frame, and strip the outermost Tag when sending the frame.
  • x
  • convention：
Created Nov 28, 2018 17:42:27 Helpful(0) Helpful(0)

Good example, I didn't use the QinQ protocol before, also didn't use this solution, after check this case, maybe i will try this solution in the future project, the example is very clear and having more details, thanks for your sharing
  • x
  • convention：
Back to list

Reply

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

Fast reply Scroll to top