In order to get this tool you need to look for iBox.
1.1.1Starting the Tool
In the installation directory of the tool, double-click iUpgrade.exe to start the tool.
1.1.2Initial Password (First Startup After Installation)
After the tool is installed, the initial password is required when the tool is started for the first time. After you set the password, the system asks you to enter the password for authentication when you start the tool next time.
Enter the password twice and click OK. The main window is displayed.
1.1.3Login
After the tool login password is initialized, you need to enter the password set during initialization every time the tool is started. Enter the password and click OK. The main window of the tool is displayed.
1.1.4Creating a Project
Choose Project > New Project from the main menu. In the displayed New Project dialog box, enter the project name, project path, and project description. The project name can contain letters and digits, but cannot contain special characters such as spaces.
1.1.4Creating an NE
Choose NE>Add NE from the main menu. The Add NE dialog box is displayed.
Adding an NE
Select a connection type in the left pane.
Enter NE information, including the IP address, Telnet user name and password, port number, NE type, upgrade path, and application scenario.
Configure FTP and upgrade information. Click Config. In the displayed Set Running Parameter dialog box, set the parameters.
Setting running parameters
Perform the FTP connectivity test before adding an NE and Click test.
----End
1.1.6Configuring an Upgrade Task
Select an NE to be upgraded, right-click the NE and choose Go to Task Window from the shortcut menu. Alternatively, click
The task configuration page includes the following:
Device information: Device type, upgrade path, and application scenario configured when an NE is added.
Relevant operations: Modify an NE, save steps, start a task, and reset a process.
Procedure: You can determine whether to execute a task and whether to pause the task before the task is executed.
Step description: Click a task and you can view the task description.
Track record: records the execution result of each step. You can export detailed records.
On the task configuration page, click Reset Process to clear the records of the previous task.
Select a task to be executed in the Procedure pane. If you want to pause the task before the operation, select Pause Before Execution.
Click Save Steps to save the selected task.
Click Start. The Check Items dialog box is displayed. Select Confirmed for all items and click OK to start the upgrade task.
The NE upgrade procedure, execution result of each step, and other key information are displayed in the Track Record pane.
Click Browse Detailed Records to view the commands and command output, which are used to identify fault causes. Click Export Detailed Records to save the commands and command output to a specified directory.
----End
To re-perform steps that have been performed successfully, click Reset ProcessinTask Window. The state of all the steps changes to Unexecuted. Select steps to be performed, click Save Steps, and then click Start.
