Hi there, Community!
This post is meant to help you better understand how to use HG8245Q as a bridge for a second router. Please see more details as you read further down the post.
BACKGROUND INFORMATION
If you want to set the ONT through the WEB interface, just log in to the web GUI with an administrator account and set the LAN port as a Layer 2 port. Then this LAN port will run as a bridge port, like this:
.png)
COMMANDS TO BE USED
Then you have to use also the OLT CLI and configure the native VLAN or ont-srvprofile.
For example, port vlan eth 1 transparent means that any packets with any VLANs could be transparent through LAN 1.
Alternatively, port vlan eth 1 100 means that only the packets with VLAN 100 can be transparent through LAN1 to the upper layer devices.
This is thus the procedure of how to use HG8245Q as a bridge for a second router.
Thanks.
