How to unpack the server chassis

Scenarios
Unpack the server chassis. Before the operation, you must get familiar with the hardware
devices.
Impact on the System
This operation has no adverse impact on the system.
Prerequisites
Conditions
No special condition is required for this operation.
Data
Data preparation is not required for this operation.
Tools
The following tools must be available before the operation:
l Protective gloves
l Electrostatic discharge (ESD) gloves
l ESD wrist strap
l Paper knife
Procedure
Step 1 Check whether the packing case and seals are in good condition.
NOTE
If the packing case is damaged (for example, the packing case is soaked or deformed, or the seals or
pressure sensitive adhesive tape is unsealed), fill in the Cargo Problems Feedback Form.
Step 2

CAUTION
When using a paper knife to unpack a packing case, ensure that the knife edge is of a proper
protrusion to avoid hurting hands or damaging the device in the packing case.
Use a paper knife to cut the pressure sensitive adhesive tape on the packing case, and open the
packing case.
Step 3 Based on Table 2-2, check that the components are intact and free from oxidation, corrosion,
or damage. Ensure that there is no missing part.
Table 2-2 Packing items