how to switch the language of phone system announcements to the desired one on the eSpace U1900？
Using Preset Announcements
Method 1: switching to a preset voice package.
This method applies only to the eSpace U1911, U1960, and U1981 that use the SCUB board. Preset voice packages for default announcements must be stored in the res directory on the SD card installed in slot 0 of the SCUB board.(You can run the show all files path rescommand to verify that these voice packages are available.)
1.Run the show current sysvoice command to query the current language of default announcements.
2.Run the config modify sysvoice country <arabic | chinese | dutch | american | british | french | portugeuse_brazilian | portugeuse_european | russian |spanish_latin | spanish_european> command to switch default announcements to a preset language.
Method 2: loading a preset voice package
1.Obtain the voice package.
Obtain the voice package for the version package (path: 01 eSpace U19xx\voice\, where U19xxindicates the unified gateway model) and rename the
voice package mrsvoice.zip (for the eSpace U1980) or voice.zip (for other eSpace U1900 models).
2. Load the voice package.
(1) Use the LMT to log in to the device and choose Version > Voice File.
(2) In the Load voice file area, click Browse, select the voice package to be loaded, and click OK.
(3）Select the target device and click Load.
If Execution Status is Load success, the voice package is loaded.
