How to switch GE network?

Y_T_Z · Created May 27, 2021 11:36:50

Hi, dear!

Before performing this operation, understand the following two points.

Switching from a 10GE network to a GE network decreases the bandwidth.
In the same network, the following conditions are not allowed:
The service planes of some servers use GE electrical ports, and the service planes of other servers use 10GE optical ports.
If any other server in the network uses 10GE optical ports, the IVS3800XS38 V5X can only use the 10GE networking mode.

Log in to the CSP OM portal as the admin user.
Choose Application Configuration > Configuration Management > Application Configuration > Application Name > Network Management > NIC Configuration.
Switch the networking mode. The server will restart 30 seconds after the networking mode is switched. The new networking mode takes effect after the server is restarted. Exercise caution when performing this operation.

Best wishes!

Y_T_Z · Created May 27, 2021 11:27:12

Hi, dear!
Welcome!
What is the server?
Not all servers support switchover. Only IVS3800XS38 V5X servers support switchover.
Wait for your feedback.

Y_T_Z · Created May 27, 2021 11:36:50

Hi, dear!

Before performing this operation, understand the following two points.

Switching from a 10GE network to a GE network decreases the bandwidth.
In the same network, the following conditions are not allowed:
The service planes of some servers use GE electrical ports, and the service planes of other servers use 10GE optical ports.
If any other server in the network uses 10GE optical ports, the IVS3800XS38 V5X can only use the 10GE networking mode.

Log in to the CSP OM portal as the admin user.
Choose Application Configuration > Configuration Management > Application Configuration > Application Name > Network Management > NIC Configuration.
Switch the networking mode. The server will restart 30 seconds after the networking mode is switched. The new networking mode takes effect after the server is restarted. Exercise caution when performing this operation.

Best wishes!

Y_T_Z · Created May 29, 2021 08:47:11

Hello, is the problem solved?

Nasr · Created May 31, 2021 10:03:06

hello bro, i didnot get your issue, please help to explain your issue in more detials