How to solve BD_STATUS Alarm?

174 0 1 0

Dear All


  I'd like to share how to solve BD_STATUS Alarm?

This alarm is reporting by IDU / OUD means that the Boad can't be detected and this is leading us the Boad fails to work


Causes of the alarm are :

    1- The Boad is installed in an incorrect slot

    2- The Board and Backplane are not Connected Properly

    3- The Backplane's Slot is Faulty

    4- The Boad is Faulty

    5- The ODU is Faulty



How to slove the alarm?

  Step 1: Verify the Physical slot and Check the Board Status as the following


how to slove


Step 2: Ensure that the Board in a Correct Slot

Step 3: Ensure that the Backplane and the Board are connected Properly

Step 4: Make sure that the Board works normally

Step 5:Replace the Board if the above steps are good and try to check again


PS : the Slot becomes faulty if there is broken Pin or bent Pin



Best Regards

Walid Nawar

PDAC - MVE - Memberships

  



  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login