How to set VLAN for LAN ports and WLAN SSID's on HG8145V5?

Dear friend!

Generally, you need to complete the configuration on the OLT first, and then perform the following operations on the web page of the device:

WAN configuration for the Internet access service:

WAN configuration for the multicast service

Details:

https://support.huawei.com/hedex/hdx.do?docid=DOC1100514286&id=EN-US_TASK_0227412833&lang=en

Thank you!

Okay thank you for your reply. I have already set-up the WAN configuration and now the only thing I need is to set VLAN's on ports and SSID which is similar to this. Take note this is not the actual settings on the HG8145V5, this is only a reference to what I am looking for.

Figure 1, this shows similar to VLAN membership

Figure 2, shows similar to Port VLAN ID (PVID)

Hello, friend!

Confirmed: 

Even if two WANs are created on the ONT (HG8145V5) and different VLAN IDs are assigned to the LAN port and SSID, the devices connected to the LAN side and the devices connected to the SSID cannot be isolated from each other. Because the WAN connection is on the WAN side. The SSID and LAN devices are on the LAN side. At the same time, I confirmed that this requirement (traffic separation) cannot be implemented on ONTs.

Thanks!