How to set up Vlans and DHCP relay
- x
- convention：
- Emotion(0)
|
Hello, friend! According to the problem description, you can create two WANs of different service types on the ONT (HG8245H5) and bind the two WANs to a specified port. Log in to the WebUI of the device. Note: Only the administrator account has the configuration permission. In the navigation tree on the left, choose Advanced Configuration > WAN Configuration. In the pane on the right, click New.
Set the parameters as required. If you are a home network user, you need to contact the ISP to enable the configuration created on the ONT. Thanks! |
user_4389325
Created Sep 23, 2021 11:05:08
(0)
(0)
Hello! Thank you for your reply! I hope you don't mind me asking few more questions to clarify. - What is the service type i should use for the second WAN? -Should i use the same VLAN ID: 10 for the second WAN? My DHCP server is using 192.168.177.XX as default gateway and the phone 192.168.100.XX - How do i set up the DHCP relay agent service and make sure my Ip phone gets an address from the other subnet (192.168.177.XXX). -Do i need to use the huawei simulator ensp ? 
Chenxintao
Reply user_4389325 Created Sep 24, 2021 01:00:55
(0)
(0)
Hi, friend! I've updated my answer, please check! Thanks! |
|
Hello, friend! According to the problem description, you can create two WANs of different service types on the ONT (HG8245H5) and bind the two WANs to a specified port. Log in to the WebUI of the device. Note: Only the administrator account has the configuration permission. In the navigation tree on the left, choose Advanced Configuration > WAN Configuration. In the pane on the right, click New.
Set the parameters as required. If you are a home network user, you need to contact the ISP to enable the configuration created on the ONT. Thanks! |
user_4389325
Created Sep 23, 2021 11:05:08
(0)
(0)
Hello! Thank you for your reply! I hope you don't mind me asking few more questions to clarify. - What is the service type i should use for the second WAN? -Should i use the same VLAN ID: 10 for the second WAN? My DHCP server is using 192.168.177.XX as default gateway and the phone 192.168.100.XX - How do i set up the DHCP relay agent service and make sure my Ip phone gets an address from the other subnet (192.168.177.XXX). -Do i need to use the huawei simulator ensp ?
Chenxintao
Reply user_4389325 Created Sep 24, 2021 01:00:55
(0)
(0)
Hi, friend! I've updated my answer, please check! Thanks! |
|
Hello, friend! For the service type of the second WAN, you need to select the VOIP type since you are using the voice service (phone).
You can set IP Acquisition Mode to DHCP in the WAN configuration.
The VLAN ID of the ONT needs to be configured on the upper-layer device (OLT).
eNSP supports only experiments on datacom devices, but does not support simulation experiments on optical network devices. Thanks! |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
