How to set the VLAN priority on the MA5616

Answer:

The following methods can be used:
- If the VLAN is used for transparent service transmission, such as the service VLAN, the priority of the VLAN is the same as the VLAN priority set in the traffic profile used by the service-port command.
- If the VLAN is the management VLAN of the ONU, run the protocol-8021p-pri command to set VLAN priorities. For ONU V800R308 and later versions, use the vlan priority command to set VLAN priorities.
- If the VLAN is a media IP or signaling IP VLAN used in voice over IP (VoIP) services, run the qos vlan command to set VLAN priorities.

https://support.huawei.com/enterprise/en/doc/EDOC1100047614/77e021bc/what-methods-can-be-used-to-set-vlan-priorities-on-an-onu

Hello, friend!

The methods of setting the VLAN priority on the ONU are as follows:  

1. For VLANs (such as service VLANs) that are transparently transmitted by the ONU, the VLAN priority is set to the priority configured in the traffic profile referenced by service-port command. 

 

2. For the ONU VLAN (such as the management VLAN), run protocol-8021p-pri command to set the VLAN priority. For the ONU V800R308 and later versions, you can run vlan priority command to set the priority.

  

3. For the VLAN of the media IP address or signaling IP address in the VoIP service, run qos vlan command to set the VLAN priority. 

Thank you!