Got it

How to set the report to 5mins interval, not Hourly. (For monthly interval)

Latest reply: Nov 28, 2018 09:45:58 1058 7 6 0 0
This post was last edited by lizhi94 at 2018-11-14 02:25.

 

How to set the report to 5mins interval monthly interval by changeing the lifecycle

 

issue analysis:
fist ,the root cause is that The period for browsing historicalperformance data is caused by data aggregation.The performance monitoring datais the original data. When the period is 5 minutes, a large amount of data isaggregated into one data record. In this way, the database can store moreperformance data.
Therefore, after auser views the historical data of more than two days, the aggregated data isdisplayed every hour instead of the original data.
You can perform thefollowing operations to disable the function of aggregating historicalperformance data.
However, in aspecial case, when the original data of the storage monitoring report exceedsthe maximum storage space of the database, data aggregation or deletion isperformed. This is a protection measure to prevent database overflow. However,the storage space of the database cannot be modified, because it's dead.
 However, you are advised not to modify thefunction.
 If the aggregation function is disabled, alarge amount of historical data occupies storage space.
For example, if thevalue is changed from 60 minutes to 5 minutes, the value of the consumedstorage space increases by 12 times. In this case, the number of days forstoring historical data is only 1.
wealso offer you the way,but the change need youself operate.in additionalyou cannot see Immediately the result,It takes a month to see the storageresult of the previous month.

 

issue solution:


thereis a way to set the report to 5mins interval, not Hourly. (For monthlyinterval)  as below:
1、performance Dumo management--->autoDumo setting
 
2、change lifecycle to 30 day

3、You can set thestorage data to exceed the database 70% dump 10%. You can also change it asrequired.
 
4、You can clickcalculate DB size to view the database storage usage.
 

 
 

  • x
  • convention:

limgsc
Created Nov 14, 2018 02:26:50

your document is work for me , i get the point , fix my issue by your doc thanks you very much ,
also hope you public more doc that levle like this .
would you please also mention where from the technical detail , i can found it from orignial part .
from orignial part i can found more correct parameter , this is more important .
View more
  • x
  • convention:

yjhd
Created Nov 14, 2018 02:30:46

the sharing is very good.
perform thefollowing operations to disable the function of aggregating historicalperformance data.
However, in aspecial case, when the original data of the storage monitoring report exceedsthe maximum storage space of the database, data aggregation or deletion isperformed. This is a protection measure to prevent database overflow. However,the storage space of the database cannot be modified, because it's dead.
However, you are advised not to modify thefunction.
If the aggregation function is disabled, alarge amount of historical data occupies storage space.
For example, if thevalue is changed from 60 minutes to 5 minutes, the value of the consumedstorage space increases by 12 times. In this case, the number of days forstoring historical data is only 1.
View more
  • x
  • convention:

Torrent
Created Nov 14, 2018 02:41:47

For example, if thevalue is changed from 60 minutes to 5 minutes, the value of the consumedstorage space increases by 12 times. In this case, the number of days forstoring historical data is only 1.
wealso offer you the way,but the change need youself operate.in additionalyou cannot see Immediately the result,It takes a month to see the storageresult of the previous month.

OK, thanks for sharing us such a good example, I learned.
View more
  • x
  • convention:

No.9527
Created Nov 14, 2018 02:58:40

The default polling interval of eSight is 15 minutes. That is, eSight synchronizes data from managed devices every 15 minutes.
also can configure security rules to classify and filter rogue APs and trigger alarm sending accordingly. Therefore, network administrators can quickly locate and handle the problems to improve network security.
View more
  • x
  • convention:

Skay
Created Nov 14, 2018 07:25:49

hi author , when the original data of the storage monitoring report exceedsthe maximum storage space of the database, data aggregation or deletion isperformed. This is a protection measure to prevent database overflow. However,the storage space of the database cannot be modified, because it's dead.

can you share some good example to me for reference ?
View more
  • x
  • convention:

Finn92
Created Nov 15, 2018 04:01:41

If the aggregation function is disabled, alarge amount of historical data occupies storage space.
For example, if thevalue is changed from 60 minutes to 5 minutes, the value of the consumedstorage space increases by 12 times. In this case, the number of days forstoring historical data is only 1.
wealso offer you the way,but the change need youself operate.in additionalyou cannot see Immediately the result,It takes a month to see the storageresult of the previous month.
hello author , maybe you can share more screenshot , it's very helpful for me to understand the post .
View more
  • x
  • convention:

w1
Created Nov 28, 2018 09:45:58

I am a little confused, can you tell me what product is related to this case, in which situation or product solution, we need to change the interval ? help you can describe more details about this case, thanks
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.