Got it

Huawei Enterprise Support Community

How to Set the Port of the SCUB/SCUN as the Upstream Port

Created: Apr 10, 2017 07:00:25Latest reply: Apr 10, 2017 08:48:28 1319 1 0 0 0

Both SCUB and SCUN have four GE optical ports, which can function as upstream ports. How to set the GE optical port of the control board (SCUB/SCUN) as upstream ports when upstream transmission is not implemented by the GIU board?

x
convention：
Emotion(0)

Like (0) Dislike (0) Favorite(0) Report

 Previous: What are precautions for the ETHB when it functions as the upstream board of the MA5600T/MA5603T?

Next: I have ftth hg8245q , and I'm facing a problem.



(0) (0)

^2#

Ravger Created Apr 10, 2017 08:48:28

Switching to the upstream port of the SCUB is controlled by the electronic switch. At a time, only the upstream port of the GIU board or the port of the control board can be used for upstream transmission.

CAUTION:

In the case of the SCUB, make sure that the current configuration of the system is already saved before running the electro-switch command. After this command is run, the system will be reset.

To set the port of the control board as the upstream port, run the electro-switch 0 location-0 command.
To set the port of the GIU board as the upstream port, run the electro-switch 0 location-1 command.
The SCUN can work with the GIU upstream board. In this case, the SCUN equals an upstream board in another GIU slot.

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.

Enterprise

Consumer

Corporate

Carriers

How to Set the Port of the SCUB/SCUN as the Upstream Port

Third Party’s Trade Secret

My Followers