Recently, many customers have consulted us about how to set up a one-click deployment for the 5KTL inverter. Here I would like to introduce the following:
1. Download a mobile app for downloading and installing the FusionSolar. The Android phone can be downloaded only on the Huawei AppGallery. The iPhone can be downloaded on the App Store. Alternatively, you can directly download and scan the following QR code.
.png)
2. The installer registers, creates the first installer account, and creates a domain named after the company name. To create multiple installers for the same company, log in to the FusionSolar, and then create an installation account by adding a user.
3. Log in to the app, start the site creation wizard, and scan the QR code on the side of the inverter. There are two scenarios:
a. Scenario 1: 4G/GPRS Intelligent Communication Bar Communication
b. Scenario 2: Non-4G/GPRS Intelligent Communication Bar Communication
4. There is a difference. If the 4G/GPRS smart communication bar is used for communication, scan the QR code, click New Power Station, enter the company, plant name, DC capacity, grid-tied time, and plant address, and click Next.
5. If the non-4G/GPRS intelligent communication rod is used for communication, after the QR code is scanned, the installer ID is installer and the password is 00000a. Click the quick setting button.
6. Set the grid code based on the area where the PV plant is located. Confirm the devices in the device list.
The value of this parameter must be the same as that of the device that is actually connected.
7. Select the router to be connected and enter the router password. Ensure that the router can be connected to the external network. Otherwise, data cannot be uploaded to the hosting cloud.
8. Normally, the inverter data can be monitored on the mobile app.
